Owner's Manual

NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
3. Check the LEDs
When you connect the power cord to the switch and plug it into an electrical
outlet, the LEDs indicate the status.
The GS348PP provides PoE+ or PoE power on ports 1–24 up to 30W to each port,
with a PoE power budget of 380W across all active PoE ports.
LED
Description
Power On. The switch is receiving power.
Off The switch is not receiving power.
Ethernet
(RJ Port in
Link/ACT
Mode)
Green.1000 Mbps link on this port.
Blinking. 1000 Mbps activity on this port.
Yellow. 100 Mbps or 10 Mbps link on this port.
Blinking. 100 Mbps or 10 Mbps activity on this port.
Off. No link is detected on this port.
PoE+
(RJ Port in
PoE Mode)
Green. PoE+ is in use.
Yellow. PoE+ halted.
Off. PoE+ is not in use on this port.
Fan
On. There is a fan error.
Off. The fan is working correctly.
PoE Max
Indicates the status of the switch’s PoE budget:
Off.6XIŴFLHQW0RUHWKDQ:RI3R(SRZHULVDYDLODEOH
On/HVVWKDQ:RI3R(SRZHULVDYDLODEOH
Blinking. At least once during the previous two minutes,
OHVVWKDQ:RI3R(SRZHUZDVDYDLODEOH
LED Mode
Green. Port is in Link/Act Mode.
Yellow. Port is in PoE Mode.