Instructions
Table Of Contents
- Contents
- 1. Introduction
- 2. Hardware Overview
- 3. Applications
- 4. Installation
- Step 1: Prepare the site
- Step 2: Protect against electrostatic discharge
- Step 3: Unpack the switch
- Step 4: Install the switch on a flat surface
- Optional Step 5: Install SFP transceiver modules (model GS310TP)
- Step 6: Connect devices to the switch
- Step 7: Check the installation
- Step 8: Apply power and check the LEDs
- Step 9: Manage the switch
- 5. Troubleshooting
3
Applications
The switch is designed to provide flexibility in configuring network connections. The
switch can be used as your only network traffic–distribution device for PoE and non-PoE
devices or with 10 Mbps, 100 Mbps, and 1 Gbps Ethernet and fiber hubs, routers, access
point, and other switches.
This chapter includes the following sections:
• Desktop switching
• PoE overview (model GS310TP)
• PoE and desktop switching (model GS310TP)
18