Instructions
Table Of Contents
- Contents
- 1. Introduction
- 2. Hardware Overview
- 3. Applications
- 4. Installation
- Step 1: Prepare the site
- Step 2: Protect against electrostatic discharge
- Step 3: Unpack the switch
- Step 4: Install the switch on a flat surface
- Optional Step 5: Install SFP transceiver modules (model GS310TP)
- Step 6: Connect devices to the switch
- Step 7: Check the installation
- Step 8: Apply power and check the LEDs
- Step 9: Manage the switch
- 5. Troubleshooting
•
Return the switch to its factory default settings. Press the Reset button for at
least five seconds.
The switch restarts and returns to its factory default settings. During this process,
the Power LED lights yellow.
Hardware Installation Guide17Hardware Overview
S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch