User Manual

Table Of Contents

S350 Series 8-Port Gigabit Ethernet Smart Switch Models GS308T and GS310TP

Configure System Information User Manual59

Remove an Entry From the Dynamic Host Mapping Table

To remove an entry from the Dynamic Host Mapping table:

1. Connect your computer to the same network as the switch.

You can use a WiFi or wired connection to connect your computer to the network, or

connect directly to a switch that is of

f-network using an Ethernet cable.

2. Launch a web browser.

3. In the address field of your web browser

, enter the IP address of the switch.

If you do not know the IP address of the switch, see

Discover or Change the Switch IP

Address on page 12.

Your web browser might display a security message, which you can ignore. For more

information, see Access the Local Browser Interface on page 18.

The login window opens.

4. Enter the switch’

s password in the Password field.

The default password is password.

The System Information page displays.

5. Select System > Management > DNS > Host Configuration.

The DNS Host Configuration page displays.

6. Select the check box next to the entry to remove.

7. Click the Delete button.

The entry is removed from the Dynamic Host Mapping table.

Change the Host Name or IP Address in an Entry of the Dynamic Host Mapping Table, View

All Entries, or Cle

ar All Entries

To change the host name or IP address in an entry of the Dynamic Host Mapping table,

view all entries, or clear all entries