User Manual

S350 Series 8-Port Gigabit Ethernet Smart Switch Models GS308T and GS310TP
Maintenance User Manual324
Copy a Software Image
You can copy a software image from one location (primary or backup) to another.
To copy a software image:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 18.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select Maintenance > File Management > Copy.
6. Select the Source Image image1 or image2 radio button to specify the image to be copied.
7. Select the Destination Image image1 or image2 radio button to specify the destination
image.
8. Click the Apply button.
Your settings are saved.
Configure Dual Image Settings
The Dual Image feature allows the switch to retain two images in permanent storage. You
can select which image must load when the reboots, specify an image description, or delete
an image. This feature reduces switch down time when you are upgrading or downgrading
the software image.