User Manual

S350 Series 8-Port Gigabit Ethernet Smart Switch Models GS308T and GS310TP
Monitor the System User Manual299
View or Clear EAP and EAPoL Statistics
You can view information about Extensible Authentication Protocol (EAP) and EAP over LAN
(EAPoL) packets that are received on physical ports.
To view or clear EAP and EAPoL statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 18.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select Monitoring > Ports > EAP Statistics.
The previous figure does not show all fields on the EAP Statistics page.
6. To refresh the page with the latest information about the switch, click the Update
button.
7. To clear the counters, which resets the EAP and EAPoL s
tatistics to default values, take
one of the following actions:
• T
o clear the counters for a specific port, select the check box associated with the port,
and click the
Clear button.
• To clear the counters for multiple ports, select the check boxes associated with the
ports, and click the
Clear button.
• To clear all counters for all ports, select the check box in the row heading, and click
the
Clear button.