User Manual

S350 Series 8-Port Gigabit Ethernet Smart Switch Models GS308T and GS310TP
Manage Device Security User Manual267
Your web browser might display a security message, which you can ignore. For more
information, see
Access the Local Browser Interface on page 18.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select Security >
ACL >
Advanced > IP ACL.
The IP ACL page shows the current size of the ACL table compared to the maximum size
of the ACL table. The current size is equal to the number of configured IPv4 ACLs plus
the number of configured MAC ACLs. The maximum size is 100.
The Current Number of ACL field displays the current number of all ACLs configured on
the switch.
The Maximum ACL field displays the maximum number of IP ACLs that can be
configured on the switch.
6. In the IP ACL ID field, specify the
ACL ID or IP ACL name, which depends on the IP ACL
type. The IP ACL ID is an integer in the following range:
• 1–99. Creates a basic IP
ACL, which allows you to permit or deny traf
fic from a
source IP address.
• 100–199. Creates an extended IP ACL, which allows you to permit or deny specific
types of Layer 3 or Layer 4 traf
fic from a source IP address to a destination IP
address. This type of ACL provides more granularity and filtering capabilities than the
standard IP ACL.
• IP ACL Name. Create an extended IP
ACL with a name string that is up to
31 alphanumeric characters in length.
The name must start with an alphabetic
character.
Each configured
ACL displays the following information:
• Rules. The number of rules currently configured for the IP ACL.
•
Type. Identifies the ACL as a basic IP
ACL (with ID from 1 to 99), extended IP ACL
(with ID from 100 to 199 or a name).