User Manual

S350 Series 8-Port Gigabit Ethernet Smart Switch Models GS308T and GS310TP
Manage Device Security User Manual228
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security
> Access
> Access Control > Access Profile Configuration.
The Packets Filtered field displays the number of packets filtered (none in the previous
figure).
6. To refresh the page with the latest information about the switch, click the Update button.
The following table describes the nonconfigurable data that is displayed.
Table 48. Access profile configuration profile summary
Field Description
Rule Type The action performed when the rules match.
Service Type The service type selected. The policy is restricted by the selected service type.
Source IP Address The source IP address of the client originating the management traffic.
Mask The subnet mask of the IP Address.
Priority The priority of the rule.
Deactivate an Access Profile
You can deactivate an access profile.
To deactivate an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.