User Manual

S350 Series 8-Port Gigabit Ethernet Smart Switch Models GS308T and GS310TP
Manage Device Security User Manual222
Before you transfer a file from a TFTP server to the switch, the following conditions must be
true:
• The file that you transfer from a TFTP server is on the server in the appropriate directory.
• The file is in the correct format.
• The switch contains a path to the
TFTP server
.
Note: Before you can transfer a certificate, you must disable HTTPS (see
Configure HTTPS Access Settings on page 218) and log back in to
the local browser interface over an HTTP session. After you generate
the certificate, you can reenable HTTPS and log back in to the local
browser interface over an HTTPS session.
To configure the certificate transfer settings for HTTPS sessions:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 18.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select Security >
Access > HTTPS > Certificate Update.