User Manual

S350 Series 8-Port Gigabit Ethernet Smart Switch Models GS308T and GS310TP
Manage Device Security User Manual201
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 18.
The login window opens.
4. Enter the switch’s password in the Password
field.
The default password is password.
The System Information page displays.
5. Select Security > Management Security > RADIUS > Global Configuration.
The Current Server IP Address field is blank if no servers are configured (see Configure
a RADIUS Authentication Server on the Switch on page 202). The switch supports up to
three RADIUS servers. If more than one RADIUS server is configured, the current server
is the server configured as the primary server. If no servers are configured as the primary
server
, the current server is the most recently added RADIUS server.
CAUTION:
The maximum delay in receiving a RADIUS response on the switch equals
the maximum number of retransmissions multiplied by the time-out period
multiplied by the number of configured RADIUS servers. If the RADIUS
request was generated by a user login attempt, all user interfaces are
blocked until the switch receives a RADIUS response.
6. In the Max Number of Retransmits field, specify the maximum number of times a request
packet is retransmitted to the RADIUS server
.
The range is from 1 to 15.
The default value is 4.
7. In the Timeout Duration field, specify the time-out value, in seconds, for request
retransmissions.
The range is from 1 to 30.
The default value is 5.