User Manual

S350 Series 8-Port Gigabit Ethernet Smart Switch Models GS308T and GS310TP
Manage Device Security User Manual199
Configure the Management Security
Settings
You can configure the login password, Remote Authorization Dial-In User Service (RADIUS)
settings, Terminal Access Controller Access Control System (TACACS) settings, and
authentication lists.
Change the Password for the Local Browser Interface
You can change the login password for the default user with the user name admin.
To change the login password for the local browser interface:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 18.
The login window opens.
4. Enter the switch’
s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security> Management Security > User Configuration > Change Password.
The Change Password page displays.
6. In the Current Password field, enter the current password.
The default password is password.
The password is displayed in dots.
7. In the New Password field, specify the new password.
The password is displayed in dots. A password can be up to 20 alphanumeric characters
in length, and is case-sensitive.
8. In the Confirm Password field, enter the password again to confirm that you entered it
correctly
.
The password is displayed in dots.