User Manual

S350 Series 8-Port Gigabit Ethernet Smart Switch Models GS308T and GS310TP
Configure Switching User Manual128
7. From the Class Value menu, specify the CoS class value to be reassigned for packets that
the voice VLAN receives.
8. Click the Apply button.
Your settings are saved.
Configure Auto-VoIP OUI-Based Properties
With Organizationally Unique Identifier (OUI)–based Auto-VoIP, voice prioritization is
provided based on OUI bits.
To configure Auto-VoIP OUI-based properties:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Discover or Change the Switch IP
Address on page 12.
Your web browser might display a security message, which you can ignore. For more
information, see Access the Local Browser Interface on page 18.
The login window opens.
4. Enter the switch’
s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching >
Auto-VoIP > OUI-based > Properties.
The OUI-Based Properties page displays.
6. In the Auto-V
oIP VLAN ID field, enter the VoIP VLAN ID of the switch.
The default Auto-VoIP VLAN ID is 2. You can use that VLAN ID or create another VLAN
ID for
Auto-VoIP.
7. From the OUI-based priority menu, select the OUI-based priority of the switch, from 0 to 7.
The default value is 7.
8. Click the Apply button.
Your settings are saved.