User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure System Information User Manual80
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select System >
Management > Denial of Service > Auto-DoS Configuration.
The Auto-DoS Configuration page displays.
7. Select the Auto-DoS Mode Enable
radio button.
When an attack is detected, a warning message is logged to the buffered log and is sent
to the syslog server
. At the same time, the port is shut down and can be enabled only
manually by the admin user.
8. Click the Apply
button.
Your settings are saved.
Configure denial of service
You can select which types of denial of service (DoS) attacks the switch monitors and blocks.
To configure individual DoS settings:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.