User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure System Information User Manual62
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select System > Management
> IPv6 Network Neighbor.
7. To refresh the page with the latest information about the switch, click the Update button.
The following table describes the information the IPv6 Network Neighbor page displays
about each IPv6 neighbor that the switch discovered.
Table 11. IPv6 network interface neighbor table information
Field Description
IPv6 address The IPv6 address of the neighbor that was detected by the switch.
MAC address The MAC address of the neighbor.
IsRtr • true (1).
The neighbor
is a router.
• false (2). The neighbor
is not a router.
Neighbor State The state of the neighboring switch:
• reachable (1).
The neighbor
is reachable by th3 switch.
• stale (2). Information about
the neighbor is scheduled for deletion.
• delay (3). No information
was received from the neighbor during the delay period.
• probe (4). The switch
is attempting to probe for the neighbor.
• unknown (5). The status
is unknown.
Last Updated The last time that the neighbor information was updated.