User Manual
Table Of Contents
- 8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and) Cloud Management
- Contents
- 1 Get Started
- Available publications
- Model descriptions
- Switch management options and default management mode
- Manage the switch by using the device UI
- About on-network and off-network access
- Access the switch on-network and connected to the Internet
- Use a Windows-based computer to access the switch on-network and connected to the Internet
- Use the NETGEAR Insight mobile app to only discover the IP address of the switch
- Use the NETGEAR Switch Discovery Tool to discover the IP address of the switch when it is connected to the Internet
- Discover the switch in a network with a DHCP server using the Smart Control Center
- Use other options to discover the switch IP address
- Access the switch on-network and connected to the Internet when you know the switch IP address
- Access the switch off-network and not connected to the Internet
- Credentials for the device UI
- Register the switch
- Change the language of the device UI
- Change the management mode of the switch
- Use the Device View of the device UI
- Configure interface settings
- Access the NETGEAR support website
- Access the user manual online
- 2 Configure System Information
- View or define system information
- Configure the IP network settings for management access
- Configure the time settings
- Configure denial of service settings
- Configure DNS settings
- Configure green Ethernet settings
- Use the Device View
- Configure Power over Ethernet
- Configure SNMP
- Configure Link Layer Discovery Protocol
- Configure DHCP snooping
- Set up PoE timer schedules
- 3 Configure Switching
- Configure the port settings and maximum frame size
- Configure link aggregation groups
- Configure VLANs
- Configure Auto-VoIP
- Configure Spanning Tree Protocol
- Configure multicast
- Manage IGMP snooping
- Configure IGMP snooping
- Configure IGMP snooping for interfaces
- View, search, or clear the IGMP snooping table
- Configure IGMP snooping for VLANs
- Modify IGMP snooping settings for a VLAN
- Disable IGMP snooping on a VLAN
- Configure one or more IGMP multicast router interfaces
- Configure an IGMP multicast router VLAN
- IGMP snooping querier overview
- Configure an IGMP snooping querier
- Configure an IGMP snooping querier for a VLAN
- Display the status of the IGMP snooping querier for VLANs
- Manage MLD snooping
- Enable MLD snooping
- Configure MLD snooping for interfaces
- Configure the MLD VLAN settings
- Modify the MLD snooping settings for a VLAN
- Remove MLD snooping from a VLAN
- Configure one or more MLD multicast router interfaces
- Configure an MLD multicast router VLAN
- Configure an MLD snooping querier
- Configure the MLD snooping querier VLAN settings
- View, search, and manage the MAC address table
- Configure Layer 2 loop protection
- 4 Configure Routing
- 5 Configure Quality of Service
- 6 Manage Device Security
- Change the device admin password for the device UI
- Manage the RADIUS settings
- Configure the TACACS+ settings
- Configure authentication lists
- Manage the Smart Control Center
- Configure management access
- Control access with profiles and rules
- Configure port authentication
- Set up traffic control
- Configure access control lists
- Use the ACL Wizard to create a simple ACL
- Configure a MAC ACL
- Configure MAC ACL rules
- Configure MAC bindings
- View or delete MAC ACL bindings in the MAC binding table
- Configure a basic or extended IPv4 ACL
- Configure rules for a basic IPv4 ACL
- Configure rules for an extended IPv4 ACL
- Configure an IPv6 ACL
- Configure rules for an IPv6 ACL
- Configure IP ACL interface bindings
- View or delete IP ACL bindings in the IP ACL binding table
- Configure VLAN ACL bindings
- 7 Monitor the Switch and the Traffic
- 8 Maintain or Troubleshoot the Switch
- A Configuration Examples
- B Specifications and Default Settings
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Specifications and Default Settings User Manual491
For more information, see the data sheet, which you can download by visiting
netgear.com/support/download/.
Switch PoE+ power
budget
N/A 55W 120W (upgradable to
190W)
Dimensions
(W x D x H)
6.2 x 4.0 x 1.1 in.
(158 x 101 x 27 mm)
9.3 x 4.0 x 1.1 in.
(236 x 101 x 27 mm)
9.3 x 4.0 x 1.1 in.
(236 x 101 x 27 mm)
Weight 0.94 lb (0.43 kg) 1.34 lb (0.61 kg) 1.41 lb (0.64 kg)
Operating temperature 32º to 104ºF (0° to 40°C)
Operating humidity 90% maximum relative humidity, noncondensing
Storage temperature –4° to 158°F (–20º to 70ºC)
Storage humidity 95% maximum relative humidity, noncondensing
Electromagnetic
certifications and
compliance
CE: 55032:2012 + AC:2013 / CISPR 32:2012, EN 61000-3-2:2014,
Class B: EN 61000-3-3:2013, EN 55024:2010
VCCI: VCCI-CISPR 32:2016, Class B
RCM: AS/NZS CISPR 32:2013 Class B
CCC: GB4943.1-2011, YD/T993-1998, GB/T9254-2008 (Class B)
FCC: 47 CFR FCC Part15, Class B, ANSI C63.4:2014
ISED: ICES-003:2016 Issue 6, Class B, ANSI C63.4:2014
BSMI: CNS 13438 Class B
Safety certifications CB report / certificate IEC 60950-1:2005 (ed.2) + A1:2009 + A2:2013
UL listed (UL 1950) / cULI EC 950/EN 60950
CE LVD: EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
RCM (AS/NZS) 60950.1:2015
CCC (China Compulsory Certificate): GB4943.1-2011; YD/T993-1998;
GB/T9254-2008 (Class B)
BSMI: CNS 14336-1
Table 90. Hardware technical specifications (continued)
Feature Model GS108Tv3 Model GS110TPv3 Model GS110TPP