User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Maintain or Troubleshoot the Switch User Manual458
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select Maintenance > T
roubleshooting > Traceroute IPv6.
7. In the IPv6 Address/Host Name field, enter the IPv6 address or host name of the device for
which the path must be discovered.
8. In the Probes Per
Hop field, enter the number of probes per hop.
The default value is 3. The range is 1 to 10.
9. In the Max TTL
field, enter the maximum time to live (TTL) for the destination.
The default value is 30. The range is 1 to 255.
10. In the Init TTL
field, enter the initial TTL to be used.
The default value is 1. The range is 1 to 255.
11. In the MaxFail
field, enter the maximum number of failures allowed in the session.
The default value is 5. The range is 1 to 255.
12. In the Interval (secs)
field, enter the time between probes in seconds.
The default value is 3. The range is 1 to 60.