User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Get Started User Manual44
Right-click the specific port that you want to view or configure to see a menu that displays
statistics and configuration options. Select the menu option to access the page that
contains the configuration or monitoring options.
The system LEDs are located on the left side of the front panel.
Power LED in the Device View
The behavior of the Power LED in the Device View depends on the model:
• GS108Tv3 and GS110TPv3. The Power
LED is a bicolor LED that serves as an indicator
of power. The Power LED must be solid green, indicating the switch is powered on and
operating normally. Solid yellow does not apply to the Device View. (If the switch is off or
booting, you cannot access the Device View.)
• GS110TPP.
The Power LED is a tricolor LED that serves as an indicator of power and
management mode status:
- Solid green
. The switch is powered on and operating normally. If you chang
ed the
management mode of the switch to NETGEAR Insight, the switch is not yet added to
an Insight managed network or not yet connected to the Insight cloud management
server.
- Solid blue.
The management mode of the switch is NETGEAR Insight, the switch is
added to an Insight managed network, and the switch is connecte
d to the Insight
cloud management server. You can manage and monitor the switch using the
NETGEAR Insight app or Insight Cloud portal
Solid yellow does not apply to the Device View. (If the switch is off
or booting, you cannot
access the Device View.)