User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Get Started User Manual42
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select System > Device
View.
The Device View page displays.
The following figure shows the Device View page for model GS110TPv3.
The Device View page depends on the model:
• GS108Tv3. For model
GS108Tv3, each port provides a left LED and a right LED that,
combined, indicate the link and speed, as described in the following table.
Table 4. Device view port LEDs for model GS108Tv3
Left port LED Right port LED Description
Solid green Solid green A valid 1 Gbps port link is established.
Solid green Black A valid 100 Mbps port link is established.
Black Solid green A valid 10 Mbps port link is established.
Black Black No port link is established.