User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Get Started User Manual41
13. Restore the configuration that you saved in Step 11:
a. Select Maintenance > Update > HTTP Firmware/File Update.
The HTTP Firmware/File Update page displays.
b. From
the File
Type menu, select Text Configuration.
c. Click the Browse
button and locate and select configuration file that you saved in
Step 11.
d. Click the Apply
button.
The file transfer begins. The page displays information about the progress of the file
transfer.
The switch applies the configuration automatically.
14. Reboot the switch:
a. Select Maintenance > Reset > Device Reboot.
The Device Reboot page displays.
b. Select
the check box.
c. Click the Apply
button.
An Alert pop-up window displays.
d. Click the OK
button to confirm.
The switch reboots.
The Device UI login page displays.
15. Log
in again.
The System Information page displays.
You can now configure the switch using all
options in the device UI.
Use the Device View of the device UI
The Device View displays the ports on the switch. This graphic tool provides an alternate way
to navigate to configuration and monitoring options. The graphic tool also provides
information about device ports, configuration and status, tables, and feature components.
To use the Device View:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.