User Manual

Table Of Contents
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Get Started User Manual38
4. Enter one of the following passwords:
Enter your device admin password.
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select the NETGEAR
Insight Mobile App and Insight Cloud Portal radio button.
An Alert pop-up window displays.
7. Read the text, and click the OK
button.
The pop-up window closes.
8. Click the Apply
button.
Another pop-up window displays.
9. Click the OK
button.
The pop-up window closes, the System Information page closes, and your settings are
saved.
The following occurs:
The first time that you enable this mode, the switch is reset to its factory default
settings.
The switch connects to the cloud server
.
If you previously added the switch to a network on the Insight
app or Insight Cloud
portal, all Insight-manageable device settings are returned to the last configuration
saved on the cloud server, including the device admin password
(that is, the
password is reset to the Insight network password).
The Device UI login page might display again. (Y
ou can close th
e page.)
You can now manage the switch using the Insight app or Insight Cloud portal.
For more information about NETGEAR Insight, visit
netgear.com/insight and
netgear.com/support/product/Insight.aspx. For knowledge base articles about NETGEAR
Insight, visit
netgear.com/support.