User Manual

Table Of Contents
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Manage Device Security User Manual377
Source IP Mask. Specify the IP mask in dotted-decimal notation to be used with the
source IP address value.
10. Click the Apply
button.
Your settings are saved.
Modify the match criteria for a basic IPv4 ACL rule
To modify the match criteria for a basic IPv4 ACL rule:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
Enter your device admin password.
If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select Security >
ACL > Advanced > IP Rules.
The IP Rules page displays.
7. From the ACL
ID menu, select the ACL that includes the rule that you want to modify.
8. In the Basic ACL Rule Table, click the rule.
The rule is a hyperlink.
The Standard ACL Rule Configuration page displays.
9. Modify the basic IP ACL rule criteria.
10. Click the Apply
button.
Your settings are saved.