User Manual

Table Of Contents
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Manage Device Security User Manual372
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select Security > ACL
> Advanced > IP ACL.
The IP ACL page shows the current size of the ACL table compared to the maximum size
of the ACL table. The current size is equal to the number of configured IPv4 ACLs plus
the number of configured MAC ACLs and IPv6 ACLs. The maximum number of ACLs on
the switch is 100.
The Current Number of ACL field displays the current number of all ACLs configured on
the switch.
The Maximum ACL field displays the maximum number of
ACLs that you can configure
on the switch.
7. In the IP ACL
ID field, specify the ACL ID or IP ACL name, which depends on the IP ACL
type. The IP ACL ID is an integer in the following range:
1–99.
Creates a basic IP ACL, which allows you to permit or deny traffic from a source
IP address.
100–199
. Creates an extended IP ACL, which allows you to permit or deny specific
types of Layer 3 or Layer 4 traf
fic from a source IP address to a destination IP
address. This type of ACL provides more granularity and filtering capabilities than the
standard IP ACL.
IP ACL Name. Create an extended IP
ACL with a name string that is up to
31 alphanumeric characters in length. The name must start with an
alphabetic
character.
Each configured ACL displays the following information:
Rules. The number of rules currently configured for the IPv4 ACL.
T
ype. Identifies the ACL as a basic IP ACL (with ID from 1 to 99), extended IP
ACL
(with ID from 100 to 199 or a name).