User Manual

Table Of Contents
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Manage Device Security User Manual354
Configure access control lists
Access control lists (ACLs) ensure that only authorized users can access specific resources
while blocking any unwarranted attempts to reach network resources. ACLs are used to
provide traffic flow control, restrict contents, decide which types of traffic are forwarded or
blocked, and provide security for the network. The switch supports a total of 100 ACLs, which
can be a combination of MAC ACLS, basic or extended IPv4 ACLs, and IPv6 ACLs.
To configure an ACL:
1. Create
an IPv4-based, IPv6-based, or MAC-based ACL ID.
2. Create a rule and assign it to a unique ACL ID.
3. Define the rules, which can identify protocols, source, and destination IP and MAC
addresses,
and other packet-matching criteria.
4. Use the ID number to assign the ACL to a port or to a LAG.
T
o view ACL configuration examples, see
Access control lists (ACLs) on page 464.
Use the ACL Wizard to create a simple ACL
The ACL Wizard helps you create a simple ACL and apply it to the selected ports easily and
quickly. First, select an ACL type to use when you create an ACL. Then add an ACL rule to
this ACL and apply this ACL on the selected ports.
Note: The steps in the following procedure describe how you can create an
ACL based on the destination MAC address. If you select a different
type of ACL (or example, an ACL based on a source IPv4), the page
displays different information.
Use the ACL Wizard to create an ACL
To use the ACL Wizard to create an ACL:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.