User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Manage Device Security User Manual353
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select Security > T
raffic Control > Protected Port.
The previous figure shows the Protected Ports Membership page for model GS110TPv3.
7. In the Ports table, click each port that you want to configure as a protected port.
Protected ports are marked with a check mark. No traffic forwar
ding is possible between
two protected ports.
8. Click the Apply
button.
Your settings are saved.