User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Get Started User Manual34
3. Power on the switch by connecting its power cord.
4. Launch a
web browser.
5. Open a web browser, and enter http://192.168.0.239
.
This is the default IP address of the switch. If you already disabled the DHCP client and
assigned a static IP address to the switch, enter the static IP address of the switch.
The Enter Registration Key page displays.
6. Enter
the registration key.
7. Click the Submit
button.
The registration takes effect on the switch and you are no longer prompted to activate
your warranty when you log in.
The Device UI login page displays.
8. Enter one of the following credentials:
•
Device admin password:
Enter the device admin password. The default device
admin password is password. The first time that you enter the default device admin
password, the Change Default Password page displays, requiring you to customize
the device admin password.
• Insight network password: If
you previously logged in to the device UI, you changed
the management mode to NETGEAR Insight, and you added the switch to an Insight
network location, enter the Insight network password to access the device UI. (In such
a situation, the Insight network password replaces the switch device admin
password.)
9. Click the Go
button.
10. If the Change Default Password page displays, specify and confirm a new device admin
password,
click the Submit button, and log in again with your new password.
The System Information page displays. You can now configure the switch.
11. After you complete the configuration of the switch, reconfigure the computer that you used
for
this process to its original TCP/IP settings.
You can now connect your switch to your network using an Ethernet cable.
Access the switch offline and enter the registration key after you log in
If you access the switch offline and obtain a registration key afterwards, you can enter the key
on a page in the device UI.
To access the switch offline and enter the registration key after you log in to the device
UI:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.