User Manual

Table Of Contents
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Manage Device Security User Manual333
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
Enter your device admin password.
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select Security > Port
Authentication > Advanced > Port Authentication.
The previous figure shows only part of the page for models GS108Tv3 and GS110TPv3.
Model GS110TPP also supports MAC-based Authentication Bypass (MAB) and includes
a MAB column to the right of the Port Control column.
7. Use the horizontal scroll bar at the bottom of the page to view all the fields.
8. Select one or more interfaces by taking one of the following actions:
To configure a single interface, select the check box associated with the port, or type
the port number in the Go T
o Interface field and click the Go button.
To configure multiple interfaces with the same settings, select the check box
associated with each interface.
To configure all interfaces with the same settings, select the check box in the heading
row
.
9. Specify the following
settings:
Port Control. Defines the
port authorization state. The control mode is set only if the
link status of the port is link up. Select one of the following options:
- Auto. The switch automatically detects the mode of the interface.
- Authorized
. The switch places the interface into an authorized state without
being
authenticated. The interface sends and receives normal traffic without client
port-based authentication.
- Unauthorized. The switch denies the selected interface system access by
moving the interface into unauthorized state. The switch cannot
provide
authentication services to the client through the interface.
- MAC based. This mode
allows multiple supplicants connected to the same port to
each authenticate individually. Each host connected to the port must authenticate