User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Manage Device Security User Manual320
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select Security > Access
> HTTPS > Certificate Management.
The Certificate Present field displays whether a certificate is present on the switch.
7. In the Certificate Management section, select the Generate Certificates
radio button.
8. Click the Apply
button.
The switch generates an SSL certificate.
The Certificate Generation Status field shows progress information.
Delete an SSL certificate
Note: Before you can delete a certificate, you must disable HTTPS (see
Configure HTTPS access settings on page 317) and log back in to the
device UI over an HTTP session. After you delete the certificate, you
can reenable HTTPS
and log back in to the device UI over an HTTPS
session.
To delete an SSL certificate:
1. Connect your computer
to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch
a web browser.