User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Manage Device Security User Manual295
Change the device admin password for the
device UI
You can change the device admin password for the user with the user name admin.
To change the device admin password for the device UI:
1. Connect your
computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ether
net cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select Security > Management
Security > User Configuration > Change Password.
The Change Password page displays.
7. In the Current
Password field, enter the current password.
The default password is password. The password is displayed in dots.
8. In the New
Password field, specify the new password.
The password is displayed in dots. A password can be up to 20 alphanumeric characters
in length, and is case-sensitive.
9. In the Confirm
Password field, enter the password again to confirm that you entered it
correctly.
The password is displayed in dots.