User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure Quality of Service User Manual283
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or
Cloud portal, enter
the Insight network password for the last Insight network location.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select QoS >
DiffServ > Advanced > Policy Configuration.
The Policy Configuration page displays.
7. Enter a policy name in the Policy
Name field.
You cannot specify the policy type. By default, the policy type is In, indicating that the
policy applies to ingress packets.
8. From the Member
Class menu, select an existing class that you want to associate with the
new policy.
9. Click the Add
button.
The new policy is added.
10. After creating the policy, click the policy name.
The policy name is a hyperlink to the page on which you can def
ine the policy attributes.