User Manual

Table Of Contents
8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure Quality of Service User Manual278
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
Enter your device admin password.
If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select QoS > DiffServ
> Advanced > IPv6 Class Configuration.
7. Enter a class name in the Class Name field.
The Class Name field also lists all the existing IPv6 class names, from which one can be
selected for modification or deletion.
8. From the Class T
ype menu, select the class type.
The switch supports only the class type value All, which means
that all the various match
criteria defined for the class are satisfied for a packet match. All signifies the logical AND
statement of all the match criteria. You can select the class type only when you are
creating a new class. After the class is created, the Class Type field becomes
nonconfigurable.
9. Click
the Add
button.
The new class is added.
10. After creating the class, click the class name.
The class name is a hyperlink to the page on which you can define the class
configuration.