User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure Quality of Service User Manual272
6. Select QoS > DiffServ > Advanced > Class Configuration.
The Class Name page displays.
7. In the Class Name
field, enter a class name.
The Class Name field also lists all existing DiffServ class names, from which you can
select one for modification or deletion. The class name can be 1 to 31 alphanumeric
characters in length.
The switch supports only the class type value
All, which means that all the various match
criteria defined for the class are satisfied for a packet match. All signifies the logical
AND
statement of all the match criteria. For any class that you add, the class type is All.
8. Click the Add
button.
The new class is added.
9. After creating the class, click the class name.
The class name is a hyperlink to the page on which you can define the class
configuration.
10. Define the criteria that must be associated the DiffServ class by selecting one of the
following radio buttons:
• Match Every. Select this radio button to add a match condition that considers all
packets
to belong
to the class. The only selection from the Match Every menu is Any.