User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure Routing User Manual253
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select Routing> ARP >
Basic > ARP Cache.
7. Navigate through the table by doing the following:
• From the Rows per page menu, select how many table entries are displayed per
page.
Possible values are 20, 50, 100, 200, and All. If you select All, the browser might be
slow to display the information.
• Click the < button to display the previous page of the table data entries.
• Click the > button to display the next page of the table data entries.
8. To refresh the page with the latest information about the switch, click the Update
button.
The following table describes the nonconfigurable information displayed on the page.
Table 54. ARP cache information
Field Description
Management VLAN ARP Cache
IP Address The IP address associated with the device’s MAC address. This must be the IP
address of a device on a subnet attached to one of the switch’s existing routing
interfaces.