User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure Routing User Manual248
Manually add a route and view the routing table
To manually add a default route or static route and view the routing table:
1. Connect your computer
to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch
a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select Routing> Routing T
able > Route Configuration.
7. From the Route Type menu, select one of the following route types.
• DefaultRoute. Creates a default route. You must specify the next hop addres
s and
preference. The Network Address and Subnet Mask fields are masked out.
• Static. Creates a static route. You must specify the network address,
subnet mask,
next hop address, and preference.
Depending on the type of route that you are creating, specify the following information:
- In the Network Address field, specify the IP interface address that identifies the
attached network.