User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure Routing User Manual237
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select Routing > IP
> IP Configuration.
7. Select the Routing Mode Enable radio button.
The default value is Disable.
8. Click the Apply
button.
Your settings are saved.
The following table describes the IP configuration information displayed on the page.
Table 50. Global IP status information
Field Description
Default Time to Live The default value inserted into the Time-To-Live field of the IP header of datagrams
originated by the switch, if a TTL value is not supplied by the transport layer protocol.
The default value is 64.
Maximum Next Hops The maximum number of hops supported by the switch.
This is a compile-time
constant.
The default value is 1.
View the IP routing statistics
You can view the IP routing statistics as specified in RFC 1213.
To view the IP routing statistics:
1. Connect your computer
to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch
a web browser.