User Manual

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)
Cloud Management
Configure Switching User Manual157
If you do not know the IP address of the switch, see Access the switch on-network and
connected to the Internet on page 20 or Access the switch off-network and not
connected to the Internet on page 28.
The Device UI login page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see
Register the switch on page 31.
4. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight app or Cloud portal, enter
the Insight network password for the last Insight network locat
ion.
For information about the credentials, see
Credentials for the device UI on page 29.
5. Click the Go
button.
The System Information page displays.
6. Select Switching > VLAN
> Advanced > VLAN Status.
The previous figure shows the LAG Membership page for model GS110TPv3.
The following table describes the nonconfigurable information displayed on the page.
Table 30. VLAN status
Field Definition
VLAN ID The VLAN identifier (VID) of the VLAN. The range of the VLAN ID is from 1 to 4093.
VLAN Name The name of the VLAN.
VLAN Type The VLAN type:
• Default
(VLAN ID
= 1). Always present.
• Auto-VoIP (VLAN ID
= 4088). Always present.
• Auto-VIdeo (VLAN ID
= 4089). Always present.
• Static. A VLAN that you configured.
• Dynamic. A VLAN
that is created through GVRP registration, that you did not convert
to a static VLAN, and that GVRP can therefore remove.
Routing Interface If VLAN routing is configured for the VLAN, the interface that is associated with the VLAN.
Member Ports The ports, LAGs, or both that are included in the VLAN.