User Manual

Table Of Contents

8-Port Gigabit (PoE+) Ethernet Smart Managed Pro Switch with (2 SFP or 2 Copper Ports and)

Cloud Management

Configure System Information User Manual109

If you do not know the IP address of the switch, see Access the switch on-network and

connected to the Internet on page 20 or Access the switch off-network and not

connected to the Internet on page 28.

The Device UI login page displays.

If you did not yet activate your warranty, the Register to activate your warranty page

displays. For more information, see

4. Enter one of the following passwords:

• Enter your device admin password.

• If you previously managed the switch through the Insight app or Cloud portal, enter

the Insight network password for the last Insight network locat

ion.

For information about the credentials, see

Credentials for the device UI on page 29.

5. Click the Go

button.

The System Information page displays.

6. Select System > SNMP

> SNMP V1/V2 > Supported MIBs.

The following table describes the SNMP Supported MIBs Status fields.

Table 23. SNMP supported MIBs

Field Description

Name The RFC number if applicable and the name of the MIB.

Description The RFC title or MIB description.

Configure SNMPv3 users

Any user can connect to the switch using the SNMPv3 protocol, but for authentication and

encryption, the switch supports only one user (admin). Therefore, you can create or modify

only one profile.