GS710TUP/GS110TUP Data Sheet

PAGE 12 of 14
10-Port Gigabit Ethernet Ultra60 PoE++
Smart Switches
Data Sheet | GS110TUP, GS710TUP
Management, Monitoring & Troubleshooting GS110TUP GS710TUP
Device auto-join and congure
(zero-touch provisioning)
Yes
Multi-site, multi-network single pane-of-glass view Yes
Multi-switch, multi-port concurrent conguration Yes
Network/global password
(for all Insight Managed devices on a network)
Yes (per network/subnet via NETGEAR Insight mobile app and Insight Cloud
Portal)
Password management Yes
IP Access List Yes
Congurable management VLAN Yes
Admin access control via RADIUS and TACACS+ Yes
IPv6 management Yes
SNTP client over UDP port 123 Yes
Firmware upgrade direct from Cloud (via mobile
device or Insight Cloud Portal)
Yes* (when using NETGEAR Insight management mode)
SNMP v1/v2c Yes
SNMP v3 with multiple IP addresses Yes
RMON group 1,2,3,9 Yes
Smart Control Center (SCC) for multi-switch
management
Yes
Port mirroring Yes
Many-to-one port mirroring Yes
Cable test utility Yes
Ping and tracerout client Yes
Local-only web browser-based management GUI
with multiple language support
‡
Yes
TLS Web-based access (version) Yes (v1.2)
HTTP/TFTP rmware update Yes
Dual software (rmware) image Yes
Memory and ash log Yes
Syslog (Server) Yes
Power Consumption
Max power (worst case, all ports used, line-rate
trafc) (Watts)
11.1 W 22.9 W
Max power (worst case, all ports used, full PoE,
line-rate trafc) (Watts)
276.8 W 554.0 W
Min power (link-down standby) (Watts) 7.4 W 21.2 W
Heat Dissipation
(min w/o PoE and max with full PoE) (BTU/hr)
Max: 945.00 BTU/hr
Min: 25.26 BTU/hr
Max: 1891.36 BTU/hr
Min: 72.38 BTU/hr
Energy Efcient Ethernet (EEE) IEEE 802.3az Yes (deactivated by default)
Auto power down Yes (deactivated by default)
Fan(s) (temperature- and load-based speed
control)
Fanless 2