GS108Tv3/GS110TPv3 Data Sheet
PAGE 5 of 14
8-Port Gigabit Ethernet Smart Switches
with Cloud Management
Data Sheet | GS108Tv3, GS110TPv3
Features and Benets
Software Features
Auto-VoIP, Auto-Voice VLAN, and Auto-Video VLAN
Automatic Voice over IP prioritization (Auto-VoIP) simplies most complex multi-vendor IP tele-
phone deployments either based on protocols (SIP, H.323 and SCCP) or on OUI bytes (default
database and user-based OUIs) in the phone source MAC address, providing the best class of ser-
vice to VoIP streams (both data and signaling) over other ordinary trafc by classifying trafc, and
enabling correct egress queue conguration. Similarly, Auto-Video VLAN enables IGMP snooping
to minimize broadcast streams.
IGMP Snooping and MLD Snooping
Facilitate fast receiver joins and leaves for multicast streams. Save cost and improve network
efciency by ensuring multicast trafc only reaches designated receivers without the need of an
extra multicast router.
Protected Ports
Ensure no exchange of unicast, broadcast, or multicast trafc between the protected ports on
the switch, thereby improving the security of your converged network. This allows your sensitive
phone phone
conversations to stay private and your surveillance video clips can be forwarded to their desig-
nated storage device without leakage or alteration.
DHCP Snooping
Ensure IP address allocation integrity by only allowing DHCP messages from trusted DHCP
servers and dropping malformed DHCP messages with a port or MAC address mismatch.
Dynamic VLAN Assignment (RADIUS)
IP phones and PCs can authenticate on the same port but under different VLAN assignment poli-
cies. Users are free to move around and enjoy the same level of network access regardless
of their physical location on the network.
Port Trunking/Link Aggregation (LACP)
Build up bigger bandwidth to support aggregated uplink/downlink trafc or to provide redun
-
dant link(s). Aggregate up to 8 ports for 8Gbps connections.
Loop Prevention and Auto-DoS Prevention
Detect and prevent (auto port shutdown) accidental network loops and protect against
DoS attacks.
PoE Timer and Scheduling (GS110TPv3 only)
Allows IT administrators to increase network security, better utilize network resources and con-
serve energy by scheduling or remotely controlling on/off of PoE ports.
Port Mirroring and Cable Test
Many-to-one port mirroring for better and quicker network diagnostics and troubleshooting.
Cable test easily identies bad Ethernet cables.
Dual Firmware Images Dual rmware images for transparent rmware updates with minimum service interruption
Firmware Updates from Cloud
Direct cloud-to-device rmware updates, initiated and/or scheduled using the Insight app, all
from the palm of your hand, anytime, anywhere!