User Manual
Table Of Contents
- Contents
- 1. Hardware Overview of the Switch
- 2. Install and Access the Switch in Your Network
- 3. Use VLANS for Traffic Segmentation
- VLAN overview
- Create basic port-based VLANs
- Assign ports to multiple port-based VLANs
- Create 802.1Q-based VLANs in a basic configuration
- Create 802.1Q-based VLANs in an advanced configuration
- Add tagged or untagged ports to an 802.1Q-based VLAN
- Specify a port PVID for an 802.1Q-based VLAN
- Manage the voice VLAN
- 4. Optimize Performance With Quality of Service
- 5. Manage Network Settings
- 6. Manage and Monitor the Switch
- Manage flow control
- Manage the port speed and the port status
- Enable loop prevention
- Manage the power saving mode
- Manually download and upgrade the firmware
- Reboot the switch
- Save the switch configuration
- Restore a saved switch configuration
- Return the switch to its factory default settings
- Enable port mirroring
- View switch information or change the switch device name
- View or clear the port statistics
- 7. Diagnostics and Troubleshooting
- A. Factory Default Settings and Technical Specifications
- B. Mount the Switch
You can select either the default VLAN ID (1) or a VLAN ID that you manually added
(see Create 802.1Q-based VLANs in a basic configuration on page 30 or Create
802.1Q-based VLANs in an advanced configuration on page 31).
7.
In the Class of Service menu, select the class value for the voice VLAN.
You can select a value from 0 (the lowest priority) to 7 (the highest priority). The
default CoS value is 6.
8. Click the Apply button.
Your settings are saved.
Enable the voice VLAN mode for ports
You can enable the voice VLAN mode for individual ports so that these ports become
members of the voice VLAN. By default, the voice VLAN mode is disabled for all ports.
To enable the voice VLAN mode for one or more ports:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select VLAN > Voice VLAN > Port Settings.
The OUI Port Settings page displays.
6. Select one or more ports.
7. In the Voice VLAN Mode menu, select Enable.
By default, the voice VLAN mode is disabled for all ports.
8. Click the Apply button.
Your settings are saved.
User Manual36Use VLANS for Traffic
Segmentation
8-Port Gigabit Ethernet Plus Switch with 2-Port 10G/Multi-Gig Uplinks GS110EMX