Operation Manual

Status LEDs
Status LEDs are located on the front panel of the switch. Each port provides a left LED and a right LED that,
in combination, indicate speed and activity.
Table 2. LED descriptions
DescriptionRight
LED
Left
LED
LED
Off. No power is supplied to the switch.
Solid green. Power is supplied to the switch and the switch is ready
for operation.
N/A (single LED
only)
Power LED
Both LEDs solid green. A 1G link with a powered-on device is
detected.
Both LEDs blinking green. Traffic is detected on the 1G link.
GreenGreenPort LEDs for ports 1
through 8
Left LED solid green, right LED off. A 100M link with a powered-on
device is detected.
Left LED blinking green, right LED off. Traffic is detected on the
100M link.
OffGreen
Left LED off, right LED solid green. A 10M link with a powered-on
device is detected.
Left LED off, right LED blinking green. Traffic is detected on the
10M link.
GreenOff
No link with a powered-on device is detected.OffOff
Both LEDs solid green. A 10G link with a powered-on device is
detected.
Both LEDs blinking green. Traffic is detected on the 10G link.
GreenGreenPort LEDs for ports 9
and 10
Left LED solid green, right LED off. A 5G link with a powered-on
device is detected.
Left LED blinking green, right LED off. Traffic is detected on the 5G
link.
OffGreen
Left LED off, right LED solid green. A 2.5G link with a powered-on
device is detected.
Left LED off, right LED blinking green. Traffic is detected on the
2.5G link.
GreenOff
Both LEDs solid yellow. A 1G or 100M link with a powered-on device
is detected.
Both LEDs blinking yellow. Traffic is detected on the 1G or 100M
link.
YellowYellow
No link with a powered-on device is detected.OffOff
Hardware Overview of the Switch
8
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX