Operation Manual

Set Up Broadcast Filtering...................................................................................35
Chapter 5 Manage Network Settings
Specify IP Address Settings for the Switch..........................................................38
Use the Local Browser Interface to Specify the Switch IP Address................38
Use the ProSAFE Plus Utility to Specify the Switch IP Address.....................38
Manage Switch Discovery Protocols....................................................................39
Manage Universal Plug and Play....................................................................39
Manage Bonjour..............................................................................................40
Manage NETGEAR Switch Discovery Protocol..............................................41
Manage Multicast Traffic With IGMP Snooping....................................................42
Customize IGMP Snooping.............................................................................42
Specify a VLAN for IGMP Snooping................................................................43
Set Up Link Aggregation......................................................................................44
Set Up a Static Link Aggregation Group.........................................................44
Set Up a Link Aggregation Control Protocol Group.........................................45
Set Up the LACP System Priority for the Switch.............................................46
Set Up LACP Port Priority and Time-Out Values.............................................47
Chapter 6 Manage and Monitor the Switch
Manage Flow Control...........................................................................................49
Manage the Port Speed and the Port Status.......................................................49
Enable Loop Prevention.......................................................................................50
Manage the Power Saving Mode.........................................................................51
Manually Download and Upgrade the Firmware..................................................52
Reboot the Switch................................................................................................53
Save the Switch Configuration.............................................................................53
Restore a Saved Switch Configuration................................................................54
Return the Switch to Its Factory Default Settings.................................................54
Use the Factory Defaults Button to Reset the Switch.....................................55
Use the Local Browser Interface to Reset the Switch.....................................55
Enable Port Mirroring...........................................................................................56
View Switch Information or Change the Switch Device Name.............................57
View or Clear the Port Statistics...........................................................................57
Chapter 7 Diagnostics and Troubleshooting
Test Cable Connections.......................................................................................60
Resolve a Subnet Conflict to Access the Switch..................................................60
Hardware Troubleshooting Chart.........................................................................61
Appendix A Factory Default Settings and Technical Specifications
Factory Default Settings.......................................................................................63
Basic Technical Specifications.............................................................................64
Appendix B Mount the Switch
Attach the Switch to a Wall...................................................................................67
Install the Switch in a Rack..................................................................................67
4
8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX