Operation Manual

6. If the switch is not yet connected to the same WiFi network as your mobile device, connect it now to the

same WiFi network, wait two minutes, and then tap the NEXT button.

The switch is discovered and registered on the network.

7. In the Insight app, select the switch and tap the Visit Web Interface link.

The login page of the local browser interface opens.

8. Enter the switch password.

The default password is password. The password is case-sensitive.

The Switch Information page displays.

Use the NETGEAR ProSAFE Plus Utility to Access the

Switch

The NETGEAR ProSAFE Plus Utility runs on Windows-based computers and lets you customize and manage

the switch for your network. For easiest access, we recommend that you cable the switch to a network with

a router or DHCP server that assigns IP addresses, power on the switch, and then use a computer that is

connected to the same network as the switch.

The ProSAFE Plus Utility requires WinPcap and Adobe Air. If WinPcap and Adobe

Air are not detected during the ProSAFE Plus Utility installation, you are prompted to

allow them to be installed.

Note

To install the ProSAFE Plus Utility and access and configure the switch:

1. Download the ProSAFE Plus Utility by visiting netgear.com/support/product/PCU.

You must use ProSAFE Plus Utility version 2.5.3 or a later version.

2. Temporarily disable the firewall, Internet security, antivirus programs, or all of these on the computer

that you use to configure the switch.

Instead of disabling security services, you can also configure your computer’s security

software to allow broadcast UDP packets to go through UDP remote and source (local

and destination) ports 63321 through 63324. To allow this traffic, you can create a

rule in your computer’s security software.

Note

3. Unzip the ProSAFE Plus Utility files, double-click the .exe file (for example, ProSAFE Plus Utility

2.5.3.exe), and install the program on your computer.

The installation process places a ProSAFE Plus Utility icon on your desktop.

4. If you temporarily disabled any security services, reenable those services.

We recommend that you restart your computer after installing the ProSAFE Plus

Utility.

Note

Install and Access the Switch in Your Network

8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS110EMX