GC728X-GC728XP-GC752X-GC752XP Hardware Installation Guide

Table Of Contents

Introduction

This hardware installation guide is for the following NETGEAR switch models:

• Insight Managed 28-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports,

Model GC728X

• Insight Managed 28-Port Gigabit Ethernet PoE+ Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber

Ports, Model GC728XP

• Insight Managed 52-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber Ports,

Model GC752X

• Insight Managed 52-Port Gigabit Ethernet PoE+ Smart Cloud Switch with 2 SFP 1G & 2 SFP+ 10G Fiber

Ports, Model GC752XP

The switch provides 24 or 48 Gigabit Ethernet RJ-45 copper ports, 2 dedicated Gigabit SFP fiber ports, and 2

dedicated 10G SFP+ fiber ports.

Models GC728XP and GC752XP support Power over Ethernet Plus (PoE+) on all 24 or 48 RJ-45 copper ports

so that you can let the switch provide power to PoE-capable devices such as WiFi access points, VoIP phones,

and IP security cameras.These models can supply up to 30W PoE (IEEE 802.3at) to each port. Model GC728XP

provides a maximum PoE power budget of 390W across all active PoE+ ports. Model GC752XP provides a

maximum PoE power budget of 505W across all active PoE+ ports.

This hardware installation guide complements the installation guide that came with your switch.

This chapter serves as an introduction to the switch and includes the following sections:

• Overview

• Features

• Safety Instructions and Warnings

For more information about the topics that are covered in this manual, visit the support website

at netgear.com/support.

Note

For technical specifications, see the data sheet at

netgear.com/business/products/switches/insight-managed-smart-cloud/gigabit-switch.aspx#tab-resources.

For switch documentation, visit downloadcenter.netgear.com.

Note