GC728X-GC728XP-GC752X-GC752XP Hardware Installation Guide
Table Of Contents
- Contents
- 1. Introduction
- 2. Hardware Overview
- 3. Installation
- Step 1: Prepare the Site
- Step 2: Protect Against Electrostatic Discharge
- Step 3: Unpack the Switch
- Step 4: Install the Switch
- Optional Step 5: Install SFP Transceiver Modules
- Step 6: Connect Devices to the Switch
- Step 7: Check the Installation
- Step 8: Apply Power and Check the LEDs
- Step 9: Manage the Switch
- 4. Applications
- 5. Troubleshooting
Hardware Description
The following sections describe the switch hardware features.
Front Panel Models GC728X and GC728XP
Model GC728X provides 24 10/100/1000BASE-T RJ-45 ports, 2 dedicated Gigabit SFP fiber ports, and 2
dedicated 10G SFP+ fiber ports
Model GC728XP provides 24 10/100/1000BASE-T RJ-45 PoE+ ports, 2 dedicated Gigabit SFP fiber ports,
and 2 dedicated 10G SFP+ fiber ports.
The following figures show the front panels.
Figure 1. Front panel model GC728X
Figure 2. Front panel model GC728XP
Table 1. Front panel components
DescriptionNumber
Cloud Connection LED1a
Power LED1b
PoE Max or Fault LED for model GC728XP only1c
Fan LED1d
Recessed multifunction Reset button (see Multifunction Reset Button on page 18)2
One micro USB console and debug port. Use this port only as directed and assisted by technical
support.
3
USB 2.0 port (see USB Port on page 17)4
Hardware Overview
11
Insight Managed 28-Port and 52-Port Gigabit Ethernet (PoE+) Smart Cloud Switch