User Manual
Table Of Contents
- Insight Managed 28-Port and 52-Port Gigabit Ethernet Smart Cloud Switches with 2 SFP 1G & 2 SFP+ 10G Fiber Ports
 - Contents
 - 1. Getting Started
- Switch Management Options and Default Management Mode
 - Available Publications
 - Web Browser Requirements and Supported Browsers
 - User-Defined Fields
 - Interface Naming Conventions
 - Access the Switch
 - Change the Management Mode of the Switch
 - Register the Switch
 - How to Configure Interface Settings
 - Local Browser Interface Device View
 
 - 2. Configure System Information
- View and Configure the Switch Management Settings
- View or Define System Information
 - View the Switch CPU Status
 - Configure the CPU Thresholds
 - Configure the IPv4 Address for the Network Interface and Management VLAN
 - Configure the IPv6 Address for the Network Interface
 - View the IPv6 Network Neighbor
 - Configure the Time Settings
 - Configure Denial of Service Settings
 - Configure DNS Settings
 - Configure Green Ethernet Settings
 
 - Manage the Bonjour Settings and View Bonjour Information
 - Control the LEDs
 - Use the Device View
 - Configure Power over Ethernet
 - Configure SNMP
 - Configure Link Layer Discovery Protocol
 - Configure DHCP L2 Relay and DHCP Snooping
 - Set Up PoE Timer Schedules
 
 - View and Configure the Switch Management Settings
 - 3. Configure Switching
 - 4. Configuring Routing
 - 5. Configure Quality of Service
 - 6. Manage Device Security
- Management Security Settings
 - Configure Management Access
 - Configure Port Authentication
 - Set Up Traffic Control
 - Configure Access Control Lists
- Use the ACL Wizard to Create a Simple ACL
 - Configure a Basic MAC ACL
 - Configure MAC ACL Rules
 - Configure MAC Bindings
 - View or Delete MAC ACL Bindings in the MAC Binding Table
 - Configure an IP ACL
 - Configure Rules for a Basic IP ACL
 - Configure Rules for an Extended IP ACL
 - Configure an IPv6 ACL
 - Configure Rules for an IPv6 ACL
 - Configure IP ACL Interface Bindings
 - View or Delete IP ACL Bindings in the IP ACL Binding Table
 - Configure VLAN ACL Bindings
 
 
 - 7. Perform Maintenance Tasks
 - 8. Manage Power over Ethernet
 - 9. Monitor the System
 - A. Configuration Examples
 - B. Hardware Specifications and Default Values
 
Configuring Routing 
195
 Insight Managed 28-Port and 52-Port Gigabit Ethernet Smart Cloud Switches
Received Datagrams Discarded 
Due To Truncated Data
The number of input datagrams discarded because datagram frame did 
not carry enough data. 
Received Datagrams Discarded 
Other
The number of input IPv6 datagrams for which no problems were 
encountered to prevent their continued processing, but that were 
discarded for reasons such as lack of buffer space. This counter does not 
include any datagrams discarded while awaiting reassembly. 
Received Datagrams Reassembly 
Required
The number of IPv6 fragments received that needed to be reassembled at 
this interface. This counter is incremented at the interface to which these 
fragments were addressed, which might not be the input interface for 
some of the fragments. 
Datagrams Successfully 
Reassembled
The number of IPv6 datagrams successfully reassembled. This counter is 
incremented at the interface to which these datagrams were addressed, 
which might not be necessarily the input interface for some of the 
fragments. 
Datagrams Failed To Reassemble The number of failures detected by the IPv6 reassembly algorithm (for 
whatever reason: timed out, errors, and so on). This is not necessarily a 
count of discarded IPv6 fragments since some algorithms (notably the 
algorithm in RFC 815) can lose track of the number of fragments by 
combining them as they are received. This counter is incremented at the 
interface to which these fragments were addressed, which might not be 
the input interface for some of the fragments. 
Datagrams Forwarded The number of output datagrams that this entity received and forwarded to 
their final destinations. In entities that do not act as IPv6 routers, this 
counter includes only those packets that were source-routed through this 
entity, and the source-route processing was successful. For a successfully 
forwarded datagram the counter of the outgoing interface is incremented.
Datagrams Locally Transmitted The number of datagrams that this entity successfully transmitted from this 
output interface. 
Datagrams Transmit Failed The number of datagrams that this entity failed to transmit successfully.
Datagrams Successfully 
Fragmented
The number of IPv6 datagrams that were fragmented at this output 
interface. 
Datagrams Failed To Fragment The number of output datagrams that could not be fragmented at this 
interface.
Datagrams Fragments Created The number of output datagram fragments that were generated as a result 
of fragmentation at this output interface. 
Multicast Datagrams Received The number of multicast packets received by the interface.
Multicast Datagrams Transmitted The number of multicast packets transmitted by the interface.
Table 53. IPv6 Statistics information (continued)
Field Description










