User Manual
Table Of Contents
- Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
- Contents
- 1. Getting Started
- Switch Management Options and Default Management Mode
- Available Publications
- Web Browser Requirements and Supported Browsers
- User-Defined Fields
- Interface Naming Conventions
- Access the Switch
- Change the Management Mode of the Switch
- Register the Switch
- How to Configure Interface Settings
- Local Browser Interface Device View
- 2. Configure System Information
- View and Configure the Switch Management Settings
- View or Define System Information
- View the Switch CPU Status
- Configure the CPU Thresholds
- Configure the IPv4 Address for the Network Interface and Management VLAN
- Configure the IPv6 Address for the Network Interface
- View the IPv6 Network Neighbor
- Configure the Time Settings
- Configure Denial of Service Settings
- Configure DNS Settings
- Configure Green Ethernet Settings
- Manage the Bonjour Settings and View Bonjour Information
- Control the LEDs
- Use the Device View
- Configure Power over Ethernet
- Configure Link Layer Discovery Protocol
- Configure DHCP L2 Relay and DHCP Snooping
- Set Up PoE Timer Schedules
- View and Configure the Switch Management Settings
- 3. Configure Switching
- 4. Configuring Routing
- 5. Configure Quality of Service
- 6. Manage Device Security
- Management Security Settings
- Configure Management Access
- Configure Port Authentication
- Set Up Traffic Control
- Configure Access Control Lists
- Use the ACL Wizard to Create a Simple ACL
- Configure a Basic MAC ACL
- Configure MAC ACL Rules
- Configure MAC Bindings
- View or Delete MAC ACL Bindings in the MAC Binding Table
- Configure an IP ACL
- Configure Rules for a Basic IP ACL
- Configure Rules for an Extended IP ACL
- Configure an IPv6 ACL
- Configure Rules for an IPv6 ACL
- Configure IP ACL Interface Bindings
- View or Delete IP ACL Bindings in the IP ACL Binding Table
- Configure VLAN ACL Bindings
- 7. Perform Maintenance Tasks
- 8. Manage Power over Ethernet
- 9. Monitor the System
- A. Configuration Examples
- B. Hardware Specifications and Default Values
Configure System Information
78
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Device Class Specifies device class as advertised by the device remotely connected to the
port.
Network Policies Information
This section of the page specifies if network policy TLV is received in the LLDP frames on this port.
Media Application Type Specifies the application type: unknown, voicesignaling, guestvoice,
guestvoicesignalling, softphonevoice, videoconferencing, streamingvideo, or
videosignaling.
Information for each application type includes the VLAN ID, priority, DSCP,
tagged bit status and unknown bit status. A port can receive information
about one or many of such application types. The application type is
displayed only if a network policy TLV is received on a port.
VLAN ID Specifies the VLAN ID associated with a particular policy type.
Priority Specifies the priority associated with a particular policy type.
DSCP Specifies the DSCP associated with a particular policy type.
Unknown Bit Status Specifies the unknown bit associated with a particular policy type.
Tagged Bit Status Specifies the tagged bit associated with a particular policy type.
Inventory Information
This section of the page specifies if inventory TLV is received in LLDP frames on this port.
Hardware Revision Specifies the hardware version of the remote device.
Firmware Revision Specifies the firmware version of the remote device.
Software Revision Specifies software version of the remote device.
Serial Number Specifies the serial number of the remote device.
Manufacturer Name Specifies the manufacturer’s name of the remote device.
Model Name Specifies the model name of the remote device.
Asset Id Specifies the asset ID of the remote device.
Location Information
This section of the page specifies if location TLV is received in LLDP frames on this port.
Sub Type Specifies the type of location information.
Location Information Specifies the location information as a string for a given type of location ID.
Extended PoE
This section of the page specifies if the remote device is a PoE device.
Device Type Specifies the remote device’s PoE device type connected to this port.
Extended PoE PSE
Field Description