User Manual

Configure System Information
71
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
The login window opens.
4. Enter the switch’s password in the password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select System > Management > LED Control.
6. Select the System LEDs On or Off radio button.
By default, the On radio button is selected and the system LEDs are enabled. When you
select the Off radio button, the Cloud LED is disabled, and for all models except for
GC110, the Max PoE LED is disabled.
7. Select the Port LEDs On or Off radio button.
By default, the On radio button is selected and the port LEDs are enabled. When you
select the Off radio button, the port LEDs are disabled.
8. Click the Apply button.
Your settings are saved.
Use the Device View
For information about the device view, see Local Browser Interface Device View on page 25.
Configure Power over Ethernet
For information about Power over Ethernet (PoE), see Chapter 8, Manage Power over
Ethernet.
Configure Link Layer Discovery Protocol
The IEEE 802.1AB-defined standard, Link Layer Discovery Protocol (LLDP), allows stations
on an 802 LAN to advertise major capabilities and physical descriptions. This information is
viewed by a network manager to identify system topology and detect bad configurations on
the LAN.
The following sections describe how you can configure LLDP:
• Configure LLDP Global Settings on page 72
• Configure LLDP Port Settings on page 73
• View the LLDP-MED Network Policy on page 74
• Configure the LLDP-MED Port Settings on page 76
• LLDP-MED Neighbors Information on page 77