User Manual

Getting Started
26
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
• Solid gray. The port is not connected. This is the default state.
• Solid green. The port is operating at its maximum speed.
• Blinking green. The port is transmitting or receiving traffic at its maximum speed
• Solid amber The port is operating at below its maximum speed.
• Blinking amber. The port is transmitting or receiving traffic below its maximum
speed.
The right port LED indicates the PoE status (does not apply to model GC110):
• Off. The port is not delivering PoE power.
• Solid green. The port is delivering PoE power.
• Solid amber. A PoE fault occurred.
The system LEDs indicate the following status:
• Cloud LED:
- Solid blue. The switch is connected to the cloud server and is set up to be
managed by the NETGEAR Insight app.
- Off. The switch is not connected to the cloud server or is set up to be managed by
the local browser interface.
• PoE Max LED (does not apply to model GC110):
- Off. Sufficient (more than 7W of) PoE power is available.
- Solid amber. Less than 7W of PoE power is available.
- Blinking amber. At least once during the previous two minutes, less than 7W of
PoE power was available.
• Fan LED (model GC510PP only):
- Solid green. The fan is operating normally.
- Solid amber. A problem occurred with the fan.
6. To see a menu that displays statistics and configuration options, right-click on a port.