User Manual

Getting Started
22
Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Change the Management Mode Back to NETGEAR Insight
Mobile App and Insight Cloud Portal
 To change the management mode of the switch back to NETGEAR Insight Mobile App
and Insight Cloud Portal:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 13.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select the NETGEAR Insight Mobile App and Insight Cloud Portal radio button.
6. Click the Apply button.
Your settings are saved. The System Information page closes and the login page displays
again. (You can close the login page.)
The switch connects to the cloud server. If you added the switch to a network on the
Insight app before, all Insight-manageable device settings are returned to the last
configuration saved on the cloud server, including the switch password (that is, the
password is reset to the Insight network password)
Register the Switch
To qualify for product updates and product warranty, we encourage you to register your
product. The first time you log in to the switch, you are given the option of registering with
NETGEAR. Registration confirms that your email alerts work, lowers technical support
resolution time, and ensures that your shipping address accuracy. We would also like to
incorporate your feedback into future product development. We never sell or rent your email
address and you can opt out of communications at any time.
If you use the Insight app, after the app discovers the switch and you add it to a network
using the NETGEAR Insight app, the switch is automatically registered to your MyNETGEAR
account. This registration process is also referred to as claiming. For information about the
NETGEAR Insight app, see the NETGEAR knowledge base articles at netgear.com/support.