User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configure System Information User Manual96
The LLDP-MED Network Policy page displays.
7. From the Interface menu, select the interface for which you want to view the information.
The page displays the data transmitted in the network policy TLVs for the interface.
8. Click the Refresh button to update the page with the latest information about the switch.
The following table describes the LLDP-MED network policy information that displays on the
page.
Table 16. LLDP-MED network policy information
Field Description
Network Policy Number The policy number.
Application The media application type associated with the policy, which can be one of the
following:
• Unknown
• V
oice
• Guest V
oice
• Guest V
oice Signaling
• Softphone V
oice
• V
ideo Conferencing
• Streaming V
ideo
• V
ideo Signaling
A port can receive multiple application types. The application information is
displayed only if a network policy
TLV was transmitted from the port.
VLAN ID The VLAN ID associated with the policy.
VLAN Type Indicates whether the VLAN associated with the policy is tagged or untagged.
User Priority The priority associated with the policy.
DSCP The DSCP associated with a particular policy type.
Configure the LLDP-MED port settings
You can enable LLDP-MED mode on a port and configure its properties.
To configure LLDP-MED settings for a port:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
For information about finding the IP address of the switch, see
Access the switch on
page 14.